November 2017 – Lansing to Ann Arbor Engineering Marvels
 

Month: November 2017

Concrete Cutting

| Leave a comment

Most driveways are made of concrete. It is installed and polished to give a nice finish which is also functional to have outside. The concrete can withstand weather changes and still stay intact. This is one of the main reasons that it is commonly used. However, it might eventually have wear and tear so that you have to replace it. This is where concrete cutting comes in.

To remove concrete, you must first cut it and loosen it so it can come off your driveway. To do this, you must:

Get the Right Tools

As with any job, you need the right tools if you plan on cutting concrete. You might choose to use a sledgehammer for the process. This is only viable if you have four inches of concrete or less. It would not work on reinforced concrete. Additionally, you must be prepared to exert some effort and engage in some manual labor. However, if this is not your cup of tea, you can move on to the circular revolving saw. This is specifically manufactured for cutting concrete. It is a power tool and should therefore be handled carefully if you do not want to get injured in the process. You can also use pneumatic jack hammers, hammer drills or electric breakers to cut your concrete driveway.

Wear Safety Equipment

Concrete cutting is a dangerous process. You could get injured while using the power tools or you could end up with various health problems because of dust. The process produces a lot of dust which can easily get into your lungs causing short term respiratory problems or long term lung complications. The dust can also irritate the skin. Additionally, it can lead to loss of sight if it gets into your eyes. This is why you need to have the needed safety equipment to stay protected. The concrete contractor must always have the necessary safety equipment. The items you need are:

  • Safety goggles for your eyes
  • Gloves for your hands
  • Steel-toed boots to protect your feet
  • Overalls to protect the rest of your body

With this equipment, you can now proceed to cut your concrete. This involves marking out your driveway for the spots of concrete you want to remove. Follow this up with a clear initial cut to loosen the concrete and then a final cut to remove the concrete.

Find Concrete Disposal Services

There are companies that offer concrete cutting equipment. You can hire these out if you would like to carry out the process on your own. Most of these companies also offer concrete cutting services just like http://miconcretepros.com/. You can find one easily in Ann Arbor if you would like to get a professional to do it then find one. This way, you do not have to place yourself in harm’s way. Finally, these companies also offer concrete disposal services. This is a specialized service because it causes complications with incineration if it is disposed of the normal way.

Conclusion

Concrete cutting can be quite dangerous so you need to adhere to every safety precaution. This ultimately starts with choosing the right tools.

Many students wonder how they can become engineers. They might know a little about some of the specializations but even this information is only by name. You may hear all the common names such as civil, electrical, mechanical, nuclear and so on but have no idea what each of them entails. Once you have learnt about each of these specialties, you will still need direction on how to become an engineer. It might not be as hard as you think it will be. All you need to do is:

 

Narrow Down the Field in Engineering

Specificity helps to make things simpler and easier. If you are considering engineering but do not know the different branches, then you might be in trouble. You first need to find out what each of the branches is about. These are numerous and you would need patience and an open mind to go through all of them. Once you have done this pick a specialization or two among the many. This can be informed by your passion and whatever else you enjoy doing. If you have a soft spot for machines and how they work, then you would probably be best suited for mechanical engineering.

 

Choose the Right School

Now that you know what you would want to pursue, do you know the schools that offer the program? That is the second step. Look into all the schools that offer engineering and figure out which one offers the specialization that you are thinking about. You should not limit yourself to the schools in your area. Consider other colleges and universities abroad that are known for their great engineering program. By the end of the day, you should have a list of your top schools of choice.

 

Engineering-related University Programs

When you are picking a school, you will need to do more than find out if they offer your program of choice. You will also be tasked with finding out how life on campus is like. In addition to this, you should focus on finding a school that offers a bridge between student life and the corporate world. For example, some schools work with various engineering firms to provide students with internships to help advance their practical knowledge of engineering. If you can get into such a school, then you would be able to have a pulse on real-life, solution-oriented engineering jobs that will also help you determine whether you really want to stick to the program and commit to the work in future.

 

Work Hard

Finally, you need to work hard. You cannot substitute hard work with anything else. Your SAT, ACT and GPA should be above average.  If you get an understanding of the basic principles in high school then you would be able to understand the engineering units better once you get to college. The same hard work will be required through college and even afterwards once you start working in the real world.  You cannot afford to slack in your studies if your dream is to become an engineer.

 

Once you pursue a degree in engineering, then there are different career paths that you can choose to follow. Engineering is present in almost every industry and is therefore very marketable. It is one of the harder programs to get through in school and so the higher percentage of people prefers to avoid it. The process of getting into an engineering program is a rigorous one. However, once you have studied, graduated and gotten registered by the relevant board, then you can work in any of the following areas depending on your specialization.

 

Construction

Construction is one of the best places for engineers to work in. There is design, implementation and supervision. These are some of the major processes in construction. A civil engineer, materials engineer, mechanical engineer, electrical and even structural engineer can work in construction. It all depends on the part of the process that you would like to be involved in. Development projects dealing with infrastructure will always be available. This applies to both government as well as private enterprise. It is upon you to choose where you would like to focus your energies on since these construction projects are almost always available around the world.

 

Electrical Grids and Systems

These are jobs for electrical and mechanical engineers. While electrical engineers will focus on matters dealing with the electricity and its flow, mechanical engineers can be involved in ensuring that the machines used for these grids and systems are in good condition. Each of these types of engineers has a specialization that will earn them a unique place in electric grids and systems jobs.

 

Environment

If you have a passion for science as well as the environment, you can comfortably fit into environmental engineering. These engineers are equipped to deal with disasters such as oil spillage, preparations for petroleum mining and other projects that affect the environment in one way or another.

 

Manufacturing

You can also work in the manufacturing sector as an engineer. This is especially common for mechanical engineers since these manufacturing plants have a lot of machinery. The manufacturing industry is also home to chemical engineers who are needed for the ratios, quantities and to direct quality management in various manufacturing and other industrial processes.

 

Conclusion

As an engineer, there are many opportunities for work as long as you know what you want to do. Students are often advised to pick their specialization as they start the college program after they have chosen where they would like to work. This helps to provide direction. After all, if you want to be in construction, then you can pursue civil, mechanical, electrical or materials engineering. If you do not fancy any of the content in these programs, then you would need to choose a program and find out where you would be able to work after graduation. Generally, these guidelines will help you to make a decision on which specialization to pursue and ultimately which sector you will end up working in.

 

Lansing to Ann Arbor Engineering Marvels ©2017. All Rights Reserved.
Powered by WordPress. Theme by Phoenix Web Solutions